Naturally occuring radioactive materials (NORM) are present in the environment and can be concentrated by technical activities, particularly those involving natural resources. These NORM deposits are highly stable and very insoluble under environmental conditions at the earth's surface. However, reducing or oxidant conditions or pH changes may enable a fraction of naturally occurring radionuclides to eventually be released to the environment. In this paper the leachability of 210Pb and 210Po was determined in three samples coming from a refractories production plant (dust, sludge, finished product), in one dust sample from a steelwork and in one ash sample coming from an electric power station. A sequential extraction method consisting of five operationally-defined fractions was used. The average leaching potential observed in the samples from the refractory industry is very low (mean values: 5.8% for 210Pb and 1.7% for 210Po). The 210Pb and 210Po leachability increases for the ash sample coming from an electric power plant using carbon (17.8% for 210Pb and 10.0% for 210Po); for the dust sample coming from a steelwork, the percent soluble fraction is 41.1% for 210Pb and 8.5% for 210Po. For all samples the results obtained show that 210Pb is slightly more soluble than 210Po.

Leachability of Naturally Occurring Radioactive Materials

DESIDERI, DONATELLA;FEDUZI, LAURA;MELI, MARIA ASSUNTA;ROSELLI, CARLA
2006

Abstract

Naturally occuring radioactive materials (NORM) are present in the environment and can be concentrated by technical activities, particularly those involving natural resources. These NORM deposits are highly stable and very insoluble under environmental conditions at the earth's surface. However, reducing or oxidant conditions or pH changes may enable a fraction of naturally occurring radionuclides to eventually be released to the environment. In this paper the leachability of 210Pb and 210Po was determined in three samples coming from a refractories production plant (dust, sludge, finished product), in one dust sample from a steelwork and in one ash sample coming from an electric power station. A sequential extraction method consisting of five operationally-defined fractions was used. The average leaching potential observed in the samples from the refractory industry is very low (mean values: 5.8% for 210Pb and 1.7% for 210Po). The 210Pb and 210Po leachability increases for the ash sample coming from an electric power plant using carbon (17.8% for 210Pb and 10.0% for 210Po); for the dust sample coming from a steelwork, the percent soluble fraction is 41.1% for 210Pb and 8.5% for 210Po. For all samples the results obtained show that 210Pb is slightly more soluble than 210Po.
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11576/1881297
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 7
  • ???jsp.display-item.citation.isi??? 6
social impact